The ENDUSTRI-GM dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions:

·  Avaliable in sizes from 1.000m³/h to 50.000m³/h dry air.

·  Avaliable in pre-cooled and after-cooled versions for warm climates.

·  Robust design with steelframe, eyebolts etc.

·  Vital parts can easily be maintained and exchanged.

·  Large air inlet grills and filters.

·  Can be built into containers for protection.

·  Adjustable dehumidifying capacity and outlet air temperature.

·  Outdoor and indoor use.

·  Dry air pressure up to 1200 Pa.

The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour.

The rotor is not affected by over saturation. Therefore, the ENDUSTRI-GM dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity.