ELECTRICAL HEATERS
The ENDUSTRI-GM heaters have been developed especially for corrossion protection in connection with sandblasting and painting operations.The ENDUSTRI-GM heaters are designed for process airflows of 1,000 m³/h to 50,000 m³/h and electrical capacity of 15kW-100kW (51,195BTU-341,350BTU).
It is a complete unit of motor, heater box, fan and electrical panel.
The ENDUSTRI-GM heaters have been developed especially for corrossion protection in connection with before, after and during painting operations, meeting the following conditions:
· Avaliable in sizes from 1.000m³/h to 15.000m³/h air.
· Avaliable in sizes from 15kW-100kW (51,195BTU-341,350BTU).
· Avaliable in sizes from 100°C-350°C
· Robust design with steelframe, eyebolts etc.
· Vital parts can easily be maintained and exchanged.
· Large air inlet and outlet grills.
· Adjustable heating capacity and outlet air temperature.
· Outdoor and indoor use.
· Air pressure up to 1.000 Pa
DIESEL HEATERS:
ENDUSTRI-GM heaters are indirectly fired running either on kerosene or gas oil. THey can be connected to a flexible or static flue and provide 100% clean, hot air. They can therefore be used in totally enclosed premises since all combustion gases are exatracted via the flue. EGNDUSTRI-GM units are fitted with all the safety features as the GE models. The stainless steel heat exchanger has been designed to give maximum efficency and ensure minimal loss of heat. In fact its efficency reaches 86% as shown on tsets conducted by the Germen TUV. ENDUSTRI-GM heaters can be used either free blowing or heating remote areas using a duct outlet adapter, with one or several flexible ducts. These heaters are also available without tank and wheells for wall mounting or suspended from ceilings. The EGMH range have been designed with the marquee industry in mind. Built to stand outside in all conditions they provide warm, clean, dry, air suitable for even the most perstigious events with maximum safety.
***LPG fired ENDUSTRI-GM air heaters are also available.